SPX2000 Professional Multi-Effect Processor

SPX2000
I/O Kabel Masuk 2
Pengonvert AD 24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
Kabel Keluar 2
Pengonvert DA 24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
I/O Digital 1x AES/EBU (2-in/2-out)
Proses Internal 32bit
Sampling frequency rate Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz
Eksternal 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay Less than 426 micro sec
Total harmonic distortion Less than 0.05% (20Hz-40kHz)
Frequency response 0, +1, -3dB 20Hz-40kHz
Dynamic Range AD+DA: 106dB
Hum & noise level Residual output noise -80dBu
Crosstalk -80 dB
Persyaratan Daya Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Konsumsi Daya 25W
Dimensi P 480mm; 18-7/8in
T 45mm; 1-3/4in (1U)
L 372.5mm; 14-5/8in
Berat Bersih 4kg; 8.8lbs
Aksesori Owner’s manual, AC power cord

Analog input and output characteristics

Terminal LEVEL SW Impedance For use with nominal Level Connector
Nominal Max. before clip
INPUT [L,R] +4dBu 10kohms 600ohm Lines +4dBu +24dBu XLR-3-31 type TRS phone jack (Balanced)
-10dBu -10dBu +10dBu
OUTPUT [L,R] +4dBu 75ohms 600ohm Lines +4dBu +24dBu XLR-3-32 TRS phone jack
-10dBu -10dBu +10dBu

Digital input and output characteristics

Terminal Format Data length Level Connector
AES/EBU (IN) AES/EBU 24bit RS422 XLR-3-31 type (Balanced)
AES/EBU (OUT) AES/EBU 24bit RS422 XLR-3-32 type (Balanced)

Control I/O characteristics

Terminal Format Level Connector
TO HOST USB USB 1.1 0 to 3.3V B type USB Connector
MIDI IN MIDI - DIN Connector 5P
OUT/THRU MIDI - DIN Connector 5P
WORD CLOCK IN - TTL/75ohms BNC Connector