Unduhan
-
Data Teknis SWP2 Series
Halaman online menjelaskan detail fungsi dasar SWP2 dan Web GUI.
Pelatihan Mandiri
Jaringan Audio
Pertanyaan Umum
-
What is the maximum number of fiber ports available?
-
Can single-mode fiber modules be installed?
-
What does the “STATUS” LED mode show?
-
What does the “VLAN” LED mode show?
-
What is the CONSOLE RJ45 connector used for?
-
What is the specification for the back-up external DC input?
-
I cannot initialize SWP2 even if I turn on the SWP2 power while holding down the LED MODE button.
-
Do you have the SWP2 without fiber port?
-
Can I connect the SWP2 and SWP1 via the fiber ports?
-
What kind of cable should I use for the SWP2's fiber ports? And how long can I wire the cable when using the SWP2's fiber ports?
-
What is the difference between the “DANTE” and “USER” Config modes?
-
Does the “Normal” VLAN Preset use VLAN 1 for every port?
-
How many VLANs are supported by the switch?
-
Can any of the RJ45 ports be used as a “Trunk”, or only the fiber ports?
-
Can 2 cables be used between a pair of switches to provide a doubled network bandwidth and a redundant connection?
-
How can a user modify the switch settings, program VLANs etc?
-
How can I use Spanning Tree for a redundant ring network?
-
Can the SWP2 and SWP1 be used in combination with other makes of switch?
-
Does the switch support EEE (“Energy Efficient Ethernet”)?
-
Does the switch support QoS with DSCP?
-
Does the switch provide IGMP Snooping (V3) for filtering multicast traffic?
-
Can the switch be the IGMP Querier?
-
Does the switch protect against network loops?
-
Does the switch have a static IP address for management purposes?
-
Can the SWP2 and SWP1 act as a DHCP server?
-
What security settings does the switch have?
-
Are there any extra security functions to protect additional devices being added to the network?
-
Which switches can be used with this software?
-
How does the software discover the switches in the network?
-
Can the software be used to configure switch settings?
-
Can each switch be given a name for easy recognition?
-
Can USER switch config settings be saved and loaded into other switches of the same type?
-
Can any programming or editing be made off-line?
-
Can the software be used to edit settings in Dante devices?
-
Can a log file be saved for trouble-shooting purpose?
-
Why do some Dante devices have 2 different MAC addresses and register 2 times in the “Connected Devices” list?
-
What is the “Snapshots” function used for?
-
MCP1 controllers do not appear in the “Connected Devices” list.
-
What is the initial user name and password for logging in to the switch via Web GUI?
-
When I start the switch in Dante mode after I changed "each server setting" via Web GUI and turned off the switch, "each server setting" do not return to the initial settings. Is this behavior by design?
-
Why is the Web GUI sometimes not able to change the VLAN settings of specific ports?
-
The SWP1 does not maintain the clock time during power-off, therefore the day and time setting will be initialized whenever it is restarted. How about the SWP2?
-
What is the RADIUS server function?
-
What other authentication methods can be used with the RADIUS server function?
-
Which port can be connected to use the authentication function?
-
How can a system with multiple switches be configured?
-
Can the RADIUS server function be used with one switch?
-
Which switches support the RADIUS server function?
