SWP2 - Spesifikasi - Perangkat Jaringan - Produk - Audio - Yamaha - Business

Dapat digulir

			SWP2-10MMF	SWP2-10SMF
Spesifikasi Umum	Jumlah port LAN (1000BASE-T/100BASE-TX/10BASE-T, konektor etherCON)		10	10
	Jumlah port SFP+ (10GBASE-LR, konektor opticalCON DUO)		0	2
	Console Port		1 (RJ-45)	1 (RJ-45)
	Negosiasi otomatis		Tersedia	Tersedia
	MDI/MDI-X Otomatis		Tersedia	Tersedia
	Switch DIP		CONFIG, VLAN PRESET	CONFIG, VLAN PRESET
	Indikator		Depan: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2	Depan: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2
	Suhu pengoperasian		0 hingga 40°C	0 hingga 40°C
	Suhu penyimpanan		-20 hingga 60°C	-20 hingga 60°C
	Catu daya (lubang masuk AC IN)		AC100V-240V, 50/60Hz, Catu daya internal (tanpa sakelar daya), Lubang catu daya: tipe pengunci	AC100V-240V, 50/60Hz, Catu daya internal (tanpa sakelar daya), Lubang catu daya: tipe pengunci
	Catu daya (lubang masuk EXT DC)		24VDC±2V, 0,78A, Konektor tipe XLR-4-32	24VDC±2V, 0,78A, Konektor tipe XLR-4-32
	Konsumsi daya maksimum		21W, 0,35A	21W, 0,35A
	Disipasi panas		18,5 kkal/jam	18,5 kkal/jam
	Material bodi		Casing logam, tanpa kipas	Casing logam, tanpa kipas
	Pengelolaan zat berbahaya		Sesuai dengan RoHS	Sesuai dengan RoHS
	Dimensi	P	480 mm	480 mm
		T	44 mm	44 mm
		L	362 mm	362 mm
	Berat		4,5 kg (tidak termasuk aksesori)	4,5 kg (tidak termasuk aksesori)
	Aksesori		Power Cord, Panduan pemilik	Power Cord, Panduan pemilik
	Opsi		PA-700 (adaptor AC)	PA-700 (adaptor AC)
General specifications	Number of SFP+ ports (10GBASE-SR, opticalCON DUO connector)		2	0

* Tombol LED MODE memungkinkan indikator PORT untuk beralih fungsi menunjukkan LINK/ACT-SPEED, STATUS, atau VLAN.

Temukan Produk Serupa

INTERFACE SPECIFICATIONS

Terminal	Format	Level	Connector
1-10 ^*1	IEEE802.3	10BASE-T/100BASE-TX/1000BASE-T	etherCON CAT5e
11,12 ^*2	IEEE802.3ae	10GBASE-SR 10GBASE-LR ^*3	opticalCON
CONSOLE (RS-232C)	-	RS-232C	RJ-45 ^*4
EXT DC INPUT	-	-	XLR-4-32 type ^*5

*1 These terminals support AutoMDI/MDI-X
*2 Conforming cable:
SWP2-10MMF: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
SWP2-10SMF: SM-type single-mode fiber cables with a core diameter /cladding diameter of approximately 9 μm/125 μm.
Maximum cable length: 10 km
*3 10GBASE-SR: SWP2-10MMF, 10GBASE-LR: SWP2-10SMF
*4 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*5 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 0.78A

CONNECTOR PIN ASSIGNMENTS

CONSOLE (RS-232C)

* These signals are not used on the SWP2.