Bisnis

MGP SeriesMixing Console

Dapat digulir

MGP32X
MGP24X
Outline Kemampuan mixing Channel mixing 32 Line Inputs (24 mono and 4 stereo) 24 Line Inputs (16 mono and 4 stereo)
Kerangka Kapabilitas Mixing GROUP 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus
AUX 6 AUX Sends + 2 FX Sends 6 AUX Sends + 2 FX Sends
MATRIX 1 Matrix out 1 Matrix out
Prosesor on-board FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)
I/O Mic inputs MIC: 24 (INPUTS HPF: 100Hz 12dB/oct) MIC: 16 (INPUTS HPF: 100Hz 12dB/oct)
Daya Phantom 48V phantom power per channel 48V phantom power per channel
Kabel Masuk LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo
I/O Digital USB Device, iPod / iPhone USB Device, iPod / iPhone
Spesifikasi Umum Total harmonic distortion 0.02% (20Hz-20kHz@ +14dBu) 0.02% (20Hz-20kHz@ +14dBu)
Frequency response +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise level Equivalent input noise -128 dBu Equivalent Input Noise -128 dBu Equivalent Input Noise
Residual output noise -92 dBu Residual Output Noise -92 dBu Residual Output Noise
Crosstalk -74dB @ 1kHz -74dB @ 1kHz
Persyaratan daya 100-240V 50Hz/60Hz 100-240V 50Hz/60Hz
Konsumsi daya 86W max 86W max
Dimensi P 1,027mm (40.4") 819mm (32.2")
T 169mm (6.7") 169mm (6.7")
L 565mm (22.2") 565mm (22.2")
Berat Bersih 19kg (41.9lb) 15.5kg (34.2lb)
Temukan Produk Serupa

Analog Input Specifications

Input Terminal Actual Source Impedance For Use With Nominal Input Level Connector
  PAD GAIN Sensitivity *1 Nominal Max. before clip
MONO CH INPUT
MGP32X: 1–24
MGP24X: 1–16		 0 -60dB 3kΩ 50-600Ω Mics -80 dBu
(0.078 mV)		 -60 dBu
(0.775 mV)		 -40 dBu
(7.75 mV)		 XLR-3-31 type *2
Phone jack *4
-16dB -36 dBu
(12.3 mV)		 -16 dBu
(123 mV)		 +4 dBu
(1.23 V)
26dB -34dB 600Ω Lines -54 dBu
(1.55 mV)		 -34 dBu
(15.5 mV)		 -14 dBu
(155 mV)		 Phone jack *3
+10dB -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 +30 dBu
(24.5 V)
STEREO CH INPUT
MGP32X: 25–32
MGP24X: 17–24		 -34dB 10kΩ 600Ω Lines -54 dBu
(1.55 mV)		 -34 dBu
(15.5 mV)		 -14 dBu
(155 mV)		 Phone jack *4
RCA Pin Jack
+10dB -10 dBu
(245 mV)		 +10 dBu
(2.45 V)		 +30 dBu
(24.5 V)
MONO CH INSERT INPUT
MGP32X: 1–24
MGP24X: 1–16		 10kΩ 600Ω Lines -20 dBu
(77.5 mV)		 0 dBu
(0.775 V)		 +20 dBu
(7.75 V)		 Phone Jack *5
ST CH INSERT INPUT L,R 10kΩ 600Ω Lines -20 dBu
(77.5 mV)		 0 dBu
(0.775 V)		 +20 dBu
(7.75 V)		 Phone Jack *5
TALKBACK INPUT 10kΩ 50-600Ω Mics -66 dBu
(0.389 mV)		 -50 dBu
(2.45 mV)		 -30 dBu
(24.5 mV)		 XLR-3-31 type *6

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog Output Specifications

Output Terminal Actual Source Impedance For Use With Nominal Output Level Connector
Nominal Max. before clip
ST OUT [L,R] 75Ω 600Ω Lines +4 dBu
(1.23 V)		 +24 dBu
(12.3 V)		 XLR3-32 type *1
Phone jack *4
MONO OUT 75Ω 600Ω Lines +4 dBu
(1.23 V)		 +24 dBu
(12.3 V)		 XLR3-32 type *1
GROUP OUT (1-4) 150Ω 10kΩ Lines +4 dBu
(1.23 V)		 +20 dBu
(7.75 V)		 Phone jack *2
AUX SEND (1-6) 75Ω 600Ω Lines +4 dBu
(1.23 V)		 +24 dBu
(12.3 V)		 XLR3-32 type *1
MATRIX OUT (1, 2) 150Ω 10kΩ Lines +4 dBu
(1.23 V)		 +20 dBu
(7.75 V)		 Phone jack *2
MONO CH INSERT OUT
MGP32X: 1–24
MGP24X: 1–16		 75Ω 10kΩ Lines 0 dBu
(0.775 V)		 +20 dBu
(7.75 V)		 Phone jack *3
ST CH INSERT OUT [L,R] 75Ω 10kΩ Lines 0 dBu
(0.775 V)		 +20 dBu
(7.75 V)		 Phone jack *3
MONITOR OUT [L,R] 150Ω 10kΩ Lines +4 dBu
(1.23 V)		 +20 dBu
(7.75 V)		 Phone jack *2
PHONES OUT 150Ω 40Ω Phones 3mW 75mW ST Phone Jack

0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)

to page top

Select Your Location