MTX Series

		MTX5-D	MTX3
Kerangka
Kapabilitas Mixing	Pencampuran Saluran	Mixing Channel : 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix	Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix/ Output Busses : 8 Mono
	Fungsi Salluran Masuk	Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8)	Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)/ Stereo CH: 3-band PEQ, Comp, Auto Gain Control
	Fungsi Saluran Keluar	Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter	Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter
I/O	Daya Phantom	+48V	+48V
Spesifikasi Umum
Proses Internal		Priority Ducking, Ambient Noise Compensator	Priority Ducking, Ambient Noise Compensator
Sampling frequency rate	Internal	48kHz/ 44.1kHz	48kHz/44.1kHz
Signal delay		Less than 3.0ms (AD-DA @48kHz)	Less than 2.5ms (AD-DA @48kHz)
Total harmonic distortion		Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)	Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)
Frequency response		20Hz to 20kHz, +0.5dB, -1.5dB	20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic Range		107dB (Gain:-6dB)	107dB (Gain:-6dB)
Hum & noise level	Equivalent input noise	-60dBu (Gain：+66dB), -83dBu (Gain：-6dB)	-60dBu (Gain：+66dB), -83dBu (Gain：-6dB)
Crosstalk		-100dB	-100dB
Heat dissipation		55.9kcal/h max	43kcal/h max
Persyaratan Daya		AC100V-240V 50Hz/60Hz	AC100V-240V 50Hz/60Hz
Konsumsi Daya		65W	50W
Dimensi	P	480mm (18.9")	480mm (18.9")
	T	88mm (3.4")	44mm (1.7")
	L	351mm (13.9")	362mm (14.3")
Berat Bersih		6.3kg (13.9lbs)	4.8kg (10.6lbs)
Lain-lain		Memory bank : PRESET 50	Memory bank : PRESET 50

* Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz.
* Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz; equivalent to 20kHz fi lter with infi nite dB/Oct attenuation.

Analog Input Specifications

Input terminal	GAIN	Actual load impedance	For use with nominal	Input Level		Connector
Input terminal	GAIN	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
INPUT 1-8	+66dB	10kΩ	50-600Ω Mics & 600Ω Lines	-62dBu	-42dBu	Euroblock
INPUT 1-8	-6dB	10kΩ	50-600Ω Mics & 600Ω Lines	+10dBu	+30dBu	Euroblock
ST IN 1,2	-	10kΩ	600Ω Lines	-10dBV	+10dBV	RCA Pin Jack

Analog Output Specifications

Output terminal	Actual Source impedance	For use with nominal	Output Level		Connector
Output terminal	Actual Source impedance	For use with nominal	Nominal	Max. before clip	Connector
OUTPUT 1-8	75Ω	10kΩ Lines	+4dBu	+24dBu	Euroblock

Digital Input and Output Specifications

Terminal	Format	Level	IN/OUT	Connector	Note
YDIF In	YDIF	RS-422	16IN	RJ45
YDIF Out	YDIF	RS-422	16OUT	RJ45
Primary	Dante	1000BASE-T	16IN/16OUT	RJ45	MTX5-D Only
Secondary	Dante	1000BASE-T	16IN/16OUT	RJ45	MTX5-D Only

Control I/O Specifications

Terminal			Level	Connector
MTX3	GPI 8IN / 4OUT	IN	1-7ch: 0V-5V 8ch: 2.5-24V : High, 2.5V or less, Allowable input +24V	Euroblock
		OUT	Open Collector
		+V	DC5V
	Network		100Base-TX	RJ-45
MTX5-D	GPI 16 IN / 8 OUT	IN	1-15ch : 0-5V 16ch : 2.5-24V : High, 2.5V or less, Allowable input +24V	Euroblock
		OUT	Open Collector
		+V	DC5V
MTX3 & MTX5-D	REMOTE		RS-232C (BAUD RATE : 38.4kbps or 115.2kbps)	D-sub 9pin (Male)
MTX3 & MTX5-D	DCP		-	RJ-45

Exi8/ Exo8 Specifications

	EXi8	EXo8
Sampling frequency	48kHz/44.1kH
Signal delay	Less than 2.5ms
Total harmonic distortion	Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB)
Frequency response	20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max
Dynamic range	107dB (Gain:-6dB)
Equivalent input noise (EIN)	-126dBu (Gain: +66dB)
Phantom power	+48V (per channel; individually settable)
Crosstalk	-100dB (@1kHz)
Heat dissipation (per hour)	21.5 kcal max.
Power supply voltage	100V 50/60Hz
Power consumption	25 W max.
Dimensions (W x H x D)	480(W) x 44(H) x 351(D)mm, 1U	480(W) x 44(H) x 351(D)mm, 1U
Included items	Power cord, Euroblock plugs (3-pin, tabbed) x8

EXi8 Analog Input Specifications

Input terminal	GAIN	Actual load impedance	For use with nominal	Input Level		Connector
Input terminal	GAIN	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
INPUT 1-8	+66dB	10kΩ	50-600Ω Mics & 600Ω Lines	-62dBu	-42dBu	Euroblock
INPUT 1-8	-6dB	10kΩ	50-600Ω Mics & 600Ω Lines	+10dBu	+30dBu	Euroblock

EXi8 Digital Input Specifications

Terminal	Format	Level	IN/OUT	Connector
YDIF In	YDIF	RS-422	16IN	RJ45

EXo8 Analog Output Specifications

Output terminal	Actual Source impedance	For use with nominal	Output Level		Connector
Output terminal	Actual Source impedance	For use with nominal	Nominal	Max. before clip	Connector
OUTPUT 1-8	75Ω	10kΩ Lines	+4dBu	+24dBu	Euroblock

EXo8 Digital Output Specifications

Terminal	Format	Level	IN/OUT	Connector
YDIF Out	YDIF	RS-422	16OUT	RJ45

Exi8 / Exo8 Control I/O Specifications

Terminal	Format	Level	Connector
Network	Ethernet 100Base-TX	-	RJ-45